MiLAN MIL-4750 User's Guide download pdf (Page 8)

Chapter 1

1-2 MIL-4750/MIL-4755 Master/Slave Modules

1.2 Features

One MIL-4750 Master module can support (in a daisy-chain

conﬁguration via the serial RS-422 interface) up to four MIL-

4755 Slave modules. Deﬁnition of daisy-chain: "out" port of

4750 to "in" port of 4755. Last 4755 "out" port to "in" port of

4750.

1.2.1 Common Features for Both Modules

• Hot-swappable

• Diagnostic LED(s)

1.2.2 Features of the MIL-4750 Master Module

• 10/100BASE-TX, RJ-45 connector for in-band management

• RS-232 serial port for out-of-band management

• SNMP management over TCP/IP, IPX or NetBEUI

• RARP, BOOTP, DHCP and telnet support

• Two-position DIP switch for hand-set conﬁguration

1.3 Utilities

To make the MIL-4750 Master module easier to manage,

MiLAN supplies the FastManage suite of software.

FastManage is a Windows-based menu software application.

Firmware upgrades of the ﬂash EPROMs can be done via

network connections.

1.4 The Next Step

Use this guide to install the modules. Then refer to the

FastManage User’s Guide

section of the LAN Products CD-ROM

to conﬁgure it to work with the FastManage software. Chapter

3 does not have any speciﬁc instructions on the FastManage

suite of software (refer to the

FastManage User’s Guide

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 21 22

No comments

MiLAN MIL-4750 User's Guide Page 8